What is the maximum temperature of your insulation coatings.

Our insulation coating will withstand temperature up to 375 degrees Fahrenheit.

What are insulation coatings used for?

Personnel protection, energy retention and process sustainability.

Will insulation coatings eliminate corrosion under insulation (CUI)?

Yes, insulation coatings bond directly to the substrate, will not absorb any corrosive liquids, do not contain corrosive chlorides, therefore eliminating corrosion under insulation.

How are insulation coatings thickness measured?

Once cured, insulation coatings can be measured with a Type 1 or Type 2  dry film thickness gauge (magnetic pull of gauge or electronic). Wet film thickness can be measured during the installation if the asset is at ambient temperatures. If the insulation coating is being applied to an asset that is in service or at an elevated temperature wet film thickness may not be able to be measured due to material curing rapidly. The dry film thickness of the insulation coating shall be checked to ensure the specified thickness is archived for optimal performance.

Can insulation coatings be applied while assets are in operation?

Yes, if the insulation coating is applied to a substrate with an elevated surface temperature this will allow for a quicker recoat time speeding up the installation of our insulation coatings.

Do you offer lunch and learn seminars for engineering or maintenance?

We have a series of topics available such as; vibration damping grout, corrosion, CUI (corrosion under insulation) and thermal insulation, just to name a few. Our lunch and learns typically last an hour and a half with lunch provided. 

How is the thickness of an insulation coating determined for energy retention?

We can create a thermal analysis report that will show BTU savings per hour for our coating applied at various thicknesses. This report can be submitted to find out what thickness will meet your expectations based on the BTU saving per hour.

How is the thickness of an insulation coating determined for personnel protection?

Please request our PP5 personnel protection thickness recommendation chart. This chart shows the minimum coating thickness recommended to achieve personnel protection ASTM standard C1055 and C1057